Pinpoint Test H : B142E:78 Or B1433:54
- H1 INSPECT THE CCM (CRUISE CONTROL MODULE) BRACKET
- With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview .
- Remove the front lower air deflector.
- Inspect for damage to the CCM bracket.
Is the CCM bracket damaged?
Yes REPAIR or INSTALL a new CCM bracket as necessary. REFER to: Cruise Control Module (CCM) . No GO to H2 - H2 PERFORM THE VERTICAL AND HORIZONTAL ALIGNMENTNOTE: Remove the front bumper cover to carry-out the vertical alignment procedure.
- Perform the alignment procedures for the CCM. REFER to: Cruise Control Radar Alignment .
Does the CCM align correctly?
Yes The system is operating correctly at this time. The concern was caused by a misaligned sensor. No INSTALL a new CCM. REFER to: Cruise Control Module (CCM) .