Luggage Compartment Lid Release

The luggage compartment lid can be released using:

• the interior luggage compartment lid release switch.
• the exterior luggage compartment lid release switch.
• a programmed RKE transmitter.
• a programmed passive key.

The BCM sends a voltage signal to the luggage compartment lid release switches. When a luggage compartment lid release switch is pressed, the voltage signal is routed to ground, indicating a request to release the luggage compartment lid latch. The BCM momentarily provides voltage to the luggage compartment lid latch to actuate the release motor.

When using the luggage compartment lid release switches, the BCM releases the luggage compartment lid only when the doors are unlocked and the vehicle is in PARK.

When using a programmed RKE transmitter, press the luggage compartment lid release button twice within 3 seconds to release the luggage compartment lid latch. The luggage compartment lid latch releases if the vehicle speed is 5 km/h (3.1 mph) or less.

The luggage compartment lid can also be released using a programmed passive key. Refer to Luggage Compartment Lid Passive Entry in this service information.