Remote Start Message Displays
WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The IPC provides remote start messages to inform the driver the vehicle is in the remote start active state and how to change the state to a driveable state. The remote start message display is active as soon as the vehicle is remote started (that is, the engine is running, but the ignition status is off).
The IPC receives the remote start status message from the GWM over the High Speed Controller Area Network 3 (HS3-CAN). The GWM receives the remote start status message from the BCM over the High Speed Controller Area Network 1 (HS1-CAN).