Cruise Control Message Center Indicator

WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The IPC uses the following messaged inputs to control the cruise control message center indicator:

cruise control status
cruise control set speed
cruise control override

The IPC receives the cruise control messages from the GWM over the High Speed Controller Area Network 3 (HS3-CAN). The GWM receives the cruise control messages from the PCM over the High Speed Controller Area Network 1 (HS1-CAN).

The IPC uses cruise control status, cruise control set speed and cruise control override messaged inputs to control the cruise control message center indicator. When the ECO mode is active, the cruise control system allows a wider range of vehicle speed loss before accelerating to maintain the selected speed for better economy. The IPC receives the cruise control messages from the GWM over the High Speed Controller Area Network 3 (HS3-CAN). The GWM receives the cruise control messages from the PCM over the High Speed Controller Area Network 1 (HS1-CAN).