ABS Warning Indicator
WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The IPC receives the ABS warning indicator request message from the GWM over the High Speed Controller Area Network 3 (HS3-CAN). The GWM receives the ABS warning indicator request message from the ABS module over the High Speed Controller Area Network 2 (HS2-CAN). If a fault condition exists in the ABS, the ABS module sends the ABS warning indicator request message to either flash or illuminate the ABS warning indicator.
Refer to ABS/Brake/Stability-Traction Control System Indication description for information on the conditions when the ABS warning indicator is turned on.