LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Door Handles, Door Locks, Latches And Entry Systems (Except Hybrid/ENERGI)) >> Description And Operation >> Handles, Locks, Latches and Entry Systems - System Operation and Component Description >> Passive Entry

Passive Entry

WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The passive entry feature unlocks or locks the doors or opens the luggage compartment lid without having to use a mechanical key blade or the RKE transmitter feature.

NOTE: The lock/unlock sensors may not detect a hand if thick gloves are worn.

When the BCM detects a lock or unlock sensor is touched on an exterior door handle, or the luggage compartment lid release button is pressed, it activates the low frequency antenna in the corresponding exterior door handle and inside the luggage compartment area. The low frequency antenna sends out a signal to the passive key. The low frequency signal activates the passive key and the passive key sends a high frequency signal back to the RTM. The RTM interprets the high frequency signal from the passive key and sends the information to the BCM. If the BCM detects a programmed passive key, the BCM either unlocks the driver door, unlocks or locks all 4 doors, or releases the luggage compartment lid latch.