Factory Keycode Retrieval
WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The factory keycode for the keyless entry keypad can be retrieved from a label on the BCM, using a diagnostic scan tool, or by using 2 programmed keys.
To retrieve the factory keycode using 2 programmed keys:
- Place the first programmed key into the ignition lock cylinder or backup slot and turn the ignition on.
- Turn the ignition off and remove the first programmed key.
- Place the second programmed key into the ignition lock cylinder or backup slot and turn the ignition on.
The factory keycode displays momentarily in the message center.