Rocker Panel Moulding: Removal

WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: LH side shown, RH side similar.

NOTE: Removal steps in this procedure may contain installation details.

1.

NOTE: Before beginning any service procedure in this service information, REFER to Safety Warnings in the General Information article. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions

2.

Remove the retainers.

Courtesy of FORD MOTOR COMPANY

3.

Remove the rocker panel moulding.
- Release the clips along the side of the rocker panel moulding.
- Slide rocker panel downward and remove.

Courtesy of FORD MOTOR COMPANY