LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Hydraulic Brake System Actuation (Hybrid/ENERGI)) >> Removal And Installation >> Brake Master Cylinder >> Removal

Brake Master Cylinder: Removal

WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water.
NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    WARNING: Before beginning any service procedure in this article, refer to Health and Safety Precautions . Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

  1. 2.

GFD70642Courtesy of FORD MOTOR COMPANY

  1. 3.

    Torque: 18 lb.ft (25 Nm)
GFD70643Courtesy of FORD MOTOR COMPANY

  1. 4.

    Torque: 18 lb.ft (25 Nm)
GFD70644Courtesy of FORD MOTOR COMPANY