Global Open/Close
WARNING: This page is about a different car, the 2017 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The global open/close feature may be enabled/disabled by the customer following a procedure listed in the Owner's Literature. For a complete list of available programmable parameters, refer to Module Configuration System (Hybrid/Energi)
.
The global open/close feature only activates when the ignition is off and the delayed accessory relay is not active. It can be activated by pressing and holding the unlock button of the RKE for 2 seconds. The BCM then sends a signal on the global open circuit to open both front door windows and the roof opening panel (if equipped) moves to the VENT position. Pressing and holding the lock button on the RKE transmitter begins closing the windows and roof opening panel (if equipped).