LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Panel System - Front End Body Panels (Hybrid/ENERGI) >> Removal And Installation >> Active Grille Shutter >> Removal

Active Grille Shutter: Removal

NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Refer to: Health and Safety Precautions .

  1. 2.

    Remove the front bumper cover. Refer to: Front Bumper Cover .

  1. 3.

    If equipped, remove the charge air cooler.

  1. 4.

    Release the retaining tabs and remove the linkage.
GFD72035Courtesy of FORD MOTOR COMPANY

  1. 5.

    On both sides. Remove the pin-type retainers.
GFD72036Courtesy of FORD MOTOR COMPANY

  1. 6.

    Remove the bolts and the active grille shutter.

    Torque: 53 lb.in (6 Nm)

GFD72037Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals