Ignition Switch - Vehicles With: Push Button Start: Removal

1. 1.
   
   Vehicles with touchscreen display.Remove the FCIM. Refer to: Front Controls Interface Module (FCIM) - Vehicles With: SYNC 2/Touchscreen Display . Refer to: Front Controls Interface Module (FCIM) - Vehicles With: Sony Audio System .

1. 2.
   
   Vehicles with touchscreen display.Remove the retainers, disconnect the electrical connector and remove the FCIM.

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Vehicles without touchscreen display.Remove the FCDIM. Refer to: Front Control/Display Interface Module (FCDIM) .

1. 4.
   
   Remove the push button ignition switch.

   1. 1.
      
      Release the tabs. Use the General Equipment: Interior Trim Remover

   1. 2.
      
      Disconnect the electrical connector and remove the ignition switch.

Courtesy of FORD MOTOR COMPANY