LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel And Column Electrical Components (Hybrid/ENERGI) >> Removal And Installation >> Ignition Lock Cylinder Housing >> Removal

Ignition Lock Cylinder Housing: Removal

  1. 1.

    WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

    Follow the health and safety precautions. Refer to: Health and Safety Precautions .

  1. 2.

    Remove the SCCM. Refer to: Steering Column Control Module (SCCM) .

  1. 3.

    Remove the RH side bolt.
GFD70715Courtesy of FORD MOTOR COMPANY

  1. 4.

    Disconnect the electrical connector and remove the LH side bolt.
GFD70716Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals