LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Fusion Titanium Hybrid >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System (Hybrid/ENERGI) >> Diagnosis And Testing >> Turn Signal and Hazard Lamps >> Symptom Chart: Turn Signal and Hazard Lamps

Symptom Chart: Turn Signal and Hazard Lamps

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to: Diagnostic Methods .

Symptom Chart 

Condition Possible Sources Actions
A module does not respond to the scan tool Fuse
Wiring, terminals or connectors
Module		 REFER to: Communications Network - 2.0L Duratec - Hybrid (96kW/130PS) .
The turn signal function is inoperative Refer to the Pinpoint Test GO to Pinpoint Test A 
The turn signal function is always on Multifunction switch
SCCM		 INSTALL a new LH steering column multifunction switch. Refer to: Steering Column Multifunction Switch LH . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. Refer to: Steering Column Control Module (SCCM) .
One turn signal lamp is inoperative or always on Refer to the Pinpoint Test GO to Pinpoint Test B 
The hazard lamp function is inoperative or always on Refer to the Pinpoint Test GO to Pinpoint Test C 
scientia non olet · About LEMON Manuals