Rear Wheel Bearing and Wheel Hub - FWD: Installation

Vehicles with bearing mounted wheel speed sensor 

• 1.
  
  Install the wheel bearing and wheel hub and install the new wheel bearing and wheel hub retainers.

  Torque: 98 lb.ft (133 Nm)

Fig 1: Wheel Hub (FWD) Tightening Sequence

Courtesy of FORD MOTOR COMPANY

• 2.
  
  Position the wheel speed sensor and install the wheel speed sensor screw.

  Torque: 48 lb.in (5.4 Nm)

Courtesy of FORD MOTOR COMPANY

Vehicles with knuckle mounted wheel speed sensor 

• 3.
  
  Install the wheel bearing and wheel hub and install the new wheel bearing and wheel hub retainers.

  Torque: 98 lb.ft (133 Nm)

Courtesy of FORD MOTOR COMPANY

All vehicles 

• 4.
  
  Install the brake disc. Refer to: Brake Disc .