Intake Manifold: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- 1.
- Refer to: Fuel System Pressure Release .
- Refer to: Battery Disconnect and Connect .
- 2.
Remove the following items:- Refer to: Air Cleaner .
- 4.
Refer to: Throttle Body .
- 6.
Refer to: Quick Release Coupling .Torque: 89 lb.in (10 Nm)
- 8.
Refer to: Jacking and Lifting - Overview .
- 12.
Refer to: Fuel Rail .
- 13.NOTE: Visually inspect the intake manifold gaskets for nicks, cuts and abrasions. If these conditions are not present, the gaskets may be re-used.