Glove Compartment: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- 1.WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.
Refer to: Health and Safety Precautions .
- 2.
Release the clips and remove the RH instrument panel side trim panel. Use the General Equipment: Interior Trim Remover
- 3.
Release the clips and remove the RH instrument panel finish panel. Use the General Equipment: Interior Trim Remover
- 4.
Remove the bolts, release the retaining tabs and remove the glove compartment. Disconnect the electrical connector.Torque: 22 lb.in (2.5 Nm)