LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Focus Electric >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 143 (Parking Aid System - Vehicles With: Rear Parking Aid (Except Electric Vehicle)) >> Removal And Installation >> Front Parking Aid Sensor >> Removal

Front Parking Aid Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.
NOTE: This procedure can be used for all locations of the component.

  1. 1.

    Remove the front bumper cover. REFER to: Front Bumper Cover

  1. 2.

    Remove the front parking aid sensor.

    1. 1.

      Disconnect the parking aid sensor electrical connector.

    1. 2.

      Release the tabs.

    1. 3.

      Remove the parking aid sensor from the bracket.
GFD63463Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals