LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Focus Electric >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 143 (Parking Aid System - Vehicles With: Rear Parking Aid (Except Electric Vehicle)) >> Removal And Installation >> Front Parking Aid Sensor >> Installation

Front Parking Aid Sensor: Installation

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    After installing the sensor(s), use the scan tool to verify that the active park assist sensor PIDs are responding correctly. Carry out the Azimuth System check and the Elevation System check. REFER to: Azimuth System Check  REFER to: Elevation System Check 

  1. 3.

    If the active park assist sensor does not respond correctly, diagnose the sensor fault. REFER to: Parking Aid 
scientia non olet · About LEMON Manuals