Pinpoint Test P : U0155: Notes
WARNING: This page is about a different variant/trim than selected.
Refer to PARKING AID for schematic and connector information.
Normal Operation and Fault Conditions
The PAM communicates with the IPC on the HS-CAN.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | A CMDTC that sets when the PAM is unable to communicate with the IPC for 0.5 seconds or more after the active park assist system has been activated. |
Possible Sources
- Communication concern
- IPC
- PAM