Fuel Level Sender: Removal

WARNING: This page is about a different variant/trim than selected.

WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

1.

Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions .

2.

Remove the Fuel Pump (FP) assembly. Refer to: Fuel Pump .

3.

Disconnect the fuel level sender electrical connector. Depress the lock tabs and slide the fuel level sender upwards, and remove the sender from the Fuel Pump (FP) assembly.

GFD63239

Courtesy of FORD MOTOR COMPANY