Variable Camshaft Timing (VCT) Oil Control Solenoid: Removal
WARNING: This page is about a different variant/trim than selected.
- 1.
Remove the engine appearance cover.
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Disconnect the crankcase breather tube.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Disconnect the electrical connectors.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
NOTE:
The O-ring seals are to be reused unless damaged.
NOTE:
Note the position of the components before removal.
Remove the bolts and the VCT oil control solenoids.
 Courtesy of FORD MOTOR COMPANY
|