Radiator Lower Hose: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
- 1.
Drain the cooling system. Refer to: Cooling System Draining, Vacuum Filling and Bleeding .
- 4.
Disconnect the lower turbocharger coolant hose. Use the General Equipment: Hose Clamp Remover/Installer
- 5.
Disconnect the degas bottle hose from the coolant outlet connector. Use the General Equipment: Hose Clamp Remover/Installer
- 6.
- Disconnect the radiator lower hose retainer.
- Release the coolant hose clamp and remove the radiator lower hose. Use the General Equipment: Hose Clamp Remover/Installer