Manifold Absolute Pressure and Temperature (MAPT) Sensor: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
 Courtesy of FORD MOTOR COMPANY
|
- 2.
Use the General Equipment: Hose Clamp Remover/InstallerTorque
: 93 lb.in (10.5 Nm)
: 36 lb.in (4.1 Nm)
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Torque: 27 lb.in (3 Nm)
 Courtesy of FORD MOTOR COMPANY
|