Engine Mount: Installation

Torque: 89 lb.in (10 Nm)

• 1.
  
  Torque: 59 lb.ft (80 Nm)

• 2.
  
  Do not tighten at this time.

• Install CAC tube and tighten clamps.

  Torque: 44 lb.in (5 Nm)

• Install CAC tube bolt.

  Torque: 71 lb.in (8 Nm)

• Connect the hose. Refer to: Quick Release Coupling .

• Install CAC tube and tighten clamps.

  Torque: 35 lb.in (4 Nm)

• Install CAC tube nuts.

  Torque: 97 lb.in (11 Nm)

• Connect the hoses. Refer to: Quick Release Coupling .

• Connect the CAC tube sensor electrical connector.