Coolant Pump: Removal

WARNING: This page is about a different variant/trim than selected.

1.

Remove the thermostat housing Refer to: Thermostat Housing .

2.

Remove the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .

3.

Loosen the coolant pump pulley bolts.

GFD40794

Courtesy of FORD MOTOR COMPANY

4.

Remove the accessory drive belt. Refer to: Accessory Drive Belt .

5.

NOTE: Cover the A/C compressor belt to prevent coolant contamination of the belt.

Completely cover the A/C compressor belt with waterproof plastic.

6.

Remove the bolts and the coolant pump pulley.

GFD40795

Courtesy of FORD MOTOR COMPANY

7.

Remove the bolts and the coolant pump.

GFD40304

Courtesy of FORD MOTOR COMPANY

8.

Remove and discard the coolant pump gasket and O-ring seal.

GFD39914

Courtesy of FORD MOTOR COMPANY