LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> F-150 Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Electronic Engine Controls System - 5.0L 32V Ti-VCT) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Installation

Camshaft Position (CMP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: Before installation, lubricate the CMP sensor O-ring seal with clean engine oil.

  1. 1.

    To install, reverse the removal procedure.