Throttle Body: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE: Make sure that the mating faces are clean and free of foreign material.

1.

Install a new Throttle Body (TB) gasket.

GFD40959

Courtesy of FORD MOTOR COMPANY

2.

Install the Throttle Body (TB), then install and tighten the Throttle Body (TB) retaining bolts.
Torque:

Stage 1: 62 lb.in (7 Nm)

Stage 2: 60 °

GFD40957

Courtesy of FORD MOTOR COMPANY

3.

Connect the Throttle Body (TB) electrical connector.

GFD40956

Courtesy of FORD MOTOR COMPANY

4.

Install the air cleaner outlet pipe. Refer to: Air Cleaner Outlet Pipe .