Ignition Coil-On-Plug: Installation
WARNING: This page is about a different variant/trim than selected.
- 1.
Inspect the ignition coil-on-plug assembly for cracks, rips, or tears. Replace any damaged coil-on-plug assemblies.
- 2.
- 1.
Install the ignition coil-on-plugs.
- 2.
Install and then tighten the ignition coil-on-plug retaining bolts in the following 2 stages.Torque:
Stage 1: 62 lb.in (7 Nm)
Stage 2: 45 °
- 1.