Ignition Coil-On-Plug: Removal
WARNING: This page is about a different variant/trim than selected.
Right side
NOTE:
The upper intake manifold must be removed to access the RH ignition coil-on-plugs. Right side
- 1.
Remove the upper intake manifold. Refer to: Upper Intake Manifold .
Both sides
- 3.NOTE: Use compressed air to remove any foreign material from the ignition coil-on-plugs and surrounding area before removing the ignition coil-on-plugs.NOTE: When removing the ignition coil-on-plugs, a slight twisting motion will break the seal and ease removal.
- 1.
Remove the ignition coil-on-plug bolts.
- 2.
Remove the ignition coil-on-plugs.
- 1.