Ignition Coil-On-Plug: Installation

Both sides 

• 1.
  
  Inspect the ignition coil-on-plugs. Replace any damaged ignition coil-on-plugs. Replace any of the ignition coil-on-plug seals or rubber boots with cracks, rips or tears.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  

  • 1.
    
    Install the ignition coil-on-plugs.

  • 2.
    
    Install and tighten the ignition coil-on-plug bolts.

    Torque:

    Stage 1: 62 lb.in (7 Nm)

    Stage 2: 50 °

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Connect the ignition coil-on-plug electrical connectors.

Courtesy of FORD MOTOR COMPANY

Right side 

• 4.
  
  Install the upper intake manifold. Refer to: Upper Intake Manifold .