| Piston diameter - single grade |
3.6284-3.6289 in (92.161-92.175 mm) |
| Piston-to-cylinder bore clearance (at grade size) |
0.0010-0.0023 in (.025-.059 mm) |
| Piston ring end gap - top |
0.0079-0.0118 in (.2-.3 mm) |
| Piston ring end gap - intermediate |
0.0197-0.0315 in (.5-.8 mm) |
| Piston ring end gap - oil control |
0.0059-0.0177 in (.15-.45 mm) |
| Piston ring groove width - top |
0.0480-0.0492 in (1.22-1.25 mm) |
| Piston ring groove width - intermediate |
0.0480-0.0488 in (1.22-1.24 mm) |
| Piston ring groove width- oil control |
0.0996-0.1004 in (2.53-2.55 mm) |
| Piston ring width - top |
0.0461-0.0469 in (1.17-1.19 mm) |
| Piston ring width - intermediate |
0.0461-0.0469 in (1.17-1.19 mm) |
| Piston ring-to-groove clearance - top |
0.0012-0.0031 in (.03-.08 mm) |
| Piston ring-to-groove clearance - intermediate |
0.0012-0.0028 in (.03-.07 mm) |
| Piston pin bore diameter |
0.8663-0.8665 in (22.004-22.01 mm) |
| Piston pin diameter |
0.8660-0.8661 in (21.997-22 mm) |
| Piston pin length |
2.390-2.402 in (60.7-61 mm) |
| Piston pin-to-piston fit (clearance) |
0.0002-0.0005 in (.004-.013 mm) |
| Connecting rod-to-pin clearance |
0.0001-0.0007 in (.003-.018 mm) |
| Connecting rod pin bore diameter |
0.8663-0.8667 in (22.003-22.015 mm) |
| Connecting rod length (center-to-center) |
5.93 in (150.7 mm) |
| Connecting rod maximum allowed bend |
0.0015 in (.038 mm) |
| Connecting rod maximum allowed twist |
0.0020 in (.05 mm) |
| Connecting rod bearing-to-crankshaft clearance |
0.0011-0.0027 in (.028-.069 mm) |
| Connecting rod side clearance (as assembled to crank) - standard play |
0.0128 in (.325 mm) |
| Connecting rod side clearance (as assembled to crank) - max. play |
0.0197 in (.5 mm) |