Removal And Installation: Flexplate: Installation

WARNING: This page is about a different variant/trim than selected.

1.

NOTE: One of the 8 flexplate holes are offset so the flexplate can only be installed in one position.

Torque: 59 lb.ft (80 Nm)

Fig 1: Flexplate Tightening Sequence

Courtesy of FORD MOTOR COMPANY

2.

Install the automatic transmission. Refer to: Transmission - 3.5L Duratec (209kW/284PS) .

3.

After completing the repairs, perform the Misfire Monitor Neutral Profile Correction procedure using a diagnostic scan tool.