LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> F-150 Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine - 3.5L DURATEC (209KW/284PS)) >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly

Disassembly And Assembly Of Subassemblies: Piston: Disassembly

WARNING: This page is about a different variant/trim than selected.

  1. 1.

    Remove the piston rings and discard.
GFD39974Courtesy of FORD MOTOR COMPANY

  1. 2.

    • Remove the piston pin retainers and discard.
    • Remove the piston pin.
GFD39975Courtesy of FORD MOTOR COMPANY

  1. 3.

    NOTE: If the piston and connecting rod are to be reinstalled, they must be assembled in the same orientation. Mark the piston orientation to the connecting rod for reassembly.

    Remove the piston from the connecting rod.

GFD39976Courtesy of FORD MOTOR COMPANY

  1. 4.

    Inspect the piston and connecting rod. Refer to: Piston Inspection .
GFD39977Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals