Hydraulic Lash Adjuster
WARNING: This page is about a different variant/trim than selected.
| Item |
Specification |
| Diameter - intake |
0.4720-0.4724 in (11.989-12 mm) |
| Diameter - exhaust |
0.4720-0.4724 in (11.989-12 mm) |
| Clearance-to-bore |
0.0004-0.0020 in (.01-.051 mm) |
| Collapsed lash adjuster gap |
0.0138-0.0335 in (.35-.85 mm) |