LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> F-150 Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls System - 2.7L ECOBOOST (238KW/324PS)) >> Removal And Installation >> Oil Pressure Control Solenoid >> Removal

Oil Pressure Control Solenoid: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .

  1. 2.

    Disconnect the oil pressure control solenoid electrical connector.
GFD41205Courtesy of FORD MOTOR COMPANY

  1. 3.

    Remove the retainer and the oil pressure control solenoid.

    Torque: 97 lb.in (11 Nm)

GFD41206Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals