LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> F-150 Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls System - 2.7L ECOBOOST (238KW/324PS)) >> Removal And Installation >> Engine Oil Pressure (EOP) Sensor >> Installation

Engine Oil Pressure (EOP) Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
NOTE: If the EOP sensor is to be reused, apply thread sealant.

  1. 1.

    To install, reverse the removal procedure.

    Material: Thread Sealant with PTFE / TA-24-B (WSK-M2G350-A2)

scientia non olet · About LEMON Manuals