LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> F-150 Limited, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls System - 2.7L ECOBOOST (238KW/324PS)) >> Removal And Installation >> Crankshaft Position (CKP) Sensor >> Removal

Crankshaft Position (CKP) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: Removal steps in this procedure may contain installation details.

  1. 1.

    Remove the RH fender splash shield. Refer to: Fender Splash Shield .

  1. 2.

    Disconnect the CKP sensor electrical connector.
GFD41187Courtesy of FORD MOTOR COMPANY

  1. 3.

    Remove the retainer and CKP sensor.

    Torque: 89 lb.in (10 Nm)

GFD41188Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals