Parking Brake Cable RH: Removal

All vehicles 

• 1.
  
  Release the parking brake cable tension. Refer to: Parking Brake Cable Tension Release .

• 2.
  
  Disconnect the front parking brake cable from the cable union.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Detach the LH parking brake cable from the equalizer bracket.

Courtesy of FORD MOTOR COMPANY

• 4.
  
  Open and remove the parking brake cable clip.

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Route the LH parking brake cable though the RH parking brake cable brackets and position the LH parking brake cable aside.

Courtesy of FORD MOTOR COMPANY

• 6.
  
  Press inward on the 2 tabs and remove the equalizer bracket.

Courtesy of FORD MOTOR COMPANY

Vehicles with 3, 683 mm (145 inch) or 3, 987 mm (157 inch) wheelbase 

• 7.
  
  Remove the parking brake cable bracket bolt.

  Torque: 30 lb.ft (40 Nm)

Courtesy of FORD MOTOR COMPANY

Vehicles with 3, 581 mm (141 inch) or 4, 140 mm (163 inch) wheelbase 

• 8.
  
  Remove the parking brake cable bracket bolt.

  Torque: 18 lb.ft (25 Nm)

Courtesy of FORD MOTOR COMPANY

All vehicles 

• 9.
  
  Remove the parking brake cable bracket bolt.

  Torque: 177 lb.in (20 Nm)

Courtesy of FORD MOTOR COMPANY

• 10.
  
  

  • 1.
    
    Press inward on the 2 RH parking brake cable retainer tabs and detach the cable from caliper support bracket.

  • 2.
    
    Detach the RH parking brake cable from the parking brake shoe actuator lever.

Courtesy of FORD MOTOR COMPANY

• 11.
  
  
  • Remove the parking brake cable bracket bolt.

    Torque: 22 lb.ft (30 Nm)

  • Detach the parking brake cable from the clip and remove the RH parking brake cable.

Courtesy of FORD MOTOR COMPANY