Brake Vacuum Pump - 2.7L EcoBoost (238kW/324PS): Removal

NOTE: Removal steps in this procedure may contain installation details.

• 1.
  
  Remove the 2 nuts and the engine appearance cover.

Courtesy of FORD MOTOR COMPANY

• 2.
  
  Release the couplings and disconnect the 2 vacuum tubes.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Remove the LH front wheel and tire. Refer to: Wheel and Tire .

• 4.
  
  Remove the LH fender splash shield. Refer to: Fender Splash Shield .

• 5.
  
  Detach the wiring retainer.

Courtesy of FORD MOTOR COMPANY

• 6.
  
  Remove the 3 bolts and the brake vacuum pump.

Courtesy of FORD MOTOR COMPANY