Glove Compartment: Removal

Glove compartment 

1. 1.
   
   Remove the glove compartment hinge pins.

Courtesy of FORD MOTOR COMPANY

1. 2.
   
   Open the glove compartment.

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Remove the glove compartment dampener from the glove compartment by pushing down and forward at the damper end.

Courtesy of FORD MOTOR COMPANY

1. 4.
   
   Release glove compartment downstops and fully lower the glove compartment.

Courtesy of FORD MOTOR COMPANY

1. 5.
   
   Remove the glove compartment from the hinge line.

Courtesy of FORD MOTOR COMPANY

Glove compartment bin 

1. 6.
   
   Release the clips and remove the RH finish panel. Use the General Equipment: Interior Trim Remover

Courtesy of FORD MOTOR COMPANY

1. 7.
   
   Remove the bolts, release the clips and remove the glove compartment bin.
   • Disconnect the electrical connector.

Courtesy of FORD MOTOR COMPANY