Turbocharger Coolant Supply Tube LH: Installation
- 4.
Install the turbocharger coolant tubes, then install and tighten the new turbocharger coolant tube bolts.Torque:
Stage 1: 106 lb.in (12 Nm)
Stage 2: 60°
- 9.
- 1.
Connect the quick release coupling. REFER to: Quick Release Coupling .
- Install the turbocharger inlet pipe and then tighten the turbocharger inlet pipe clamps. Connect the turbocharger bypass hose. Connect the vacuum hoses.
Torque
: 44 lb.in (5 Nm)
- 1.
- 10.
Install the air cleaner assembly and the air cleaner outlet pipe. REFER to: Air Cleaner . REFER to: Air Cleaner Outlet Pipe .
- 11.
Fill the cooling system. REFER to: Cooling System Draining, Vacuum Filling and Bleeding .
- 12.
If equipped, install the underbody splash shield, then install the underbody splash shield fasteners.