Reset the Oil Change Indicator

Reset the Oil Change Indicator 

Activation 

• 1.
  
  Without starting the engine, place the ignition in RUN.

• 2.
  
  Simultaneously apply the accelerator and brake pedals and hold them in the fully applied position.

• 3.
  
  After 3 seconds, the message center displays SERVICE: OIL RESET IN PROG.

• 4.
  
  Continue to apply both the accelerator and brake pedals.

• 5.
  
  The SERVICE: OIL RESET IN PROG message disappears after 25 seconds and the SERVICE: OIL RESET COMPLETE is displayed.

• 6.
  
  Release both the accelerator and brake pedals.

• 7.
  
  Place the ignition in OFF.

• 8.
  
  The oil life reset procedure is complete.