Front and Rear Parking Aid Camera
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .
| Condition | Possible Sources | Actions |
|---|---|---|
| The camera system does not respond when the front parking aid camera view switch is pressed | Refer to the Pinpoint Test | GO to Pinpoint Test K |
| The rear parking aid camera is inoperative | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test I |
| All camera views are inoperative or do not operate correctly | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test G |
| One or more (not all) camera views are inoperative or do not operate correctly | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, INSPECT the camera views to determine which camera(s) is inoperative: For the rear camera, GO to Pinpoint Test I For the front camera, GO to Pinpoint Test J |
| Static/flashing/blinking/flickering/scrolling or rolling image/screen/scrolling horizontal lines for one or more camera views | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| Poor image quality (foggy/cloudy/fuzzy/blurry/hazy image or moisture/water in lens or black spots) for one or more camera views | Refer to the Pinpoint Test | GO to Pinpoint Test H |
| Frozen or slow screen transitions between camera views | IPMB | INSTALL a new IPMB. REFER to: Image Processing Module B (IPMB) . |
| Manual zoom function is inoperative (rear parking aid camera image only) | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test N |
| Visual park aid alert is inoperative (rear parking aid camera image only) | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test L |
| Active guidelines are inoperative or do no operate correctly (rear parking aid camera image only) | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test M |
| Fixed guidelines are inoperative or do not operate correctly (rear parking aid camera image only) | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test M |
| The video delay feature is inoperative or does not operate correctly (rear parking aid camera image only) | Refer to the Pinpoint Test | PERFORM an APIM reset.
. If the concern is still present after the APIM reset, GO to Pinpoint Test F |
| The front camera washer is inoperative | Front camera washer hose Front camera washer jet |
REFER to: Wipers and Washers . |