LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2016 >> Edge SE, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Parking Aid System - Vehicles With Active Park Assist >> Diagnosis And Testing >> Parking Aid >> Pinpoint Test(s) >> Pinpoint Test H : There Is An Active Park Assist Fault Message Shown In The CENTERSTACK Infotainment Display >> Pinpoint Test H : There Is An Active Park Assist Fault Message Shown In The CENTERSTACK Infotainment Display

Pinpoint Test H : There Is An Active Park Assist Fault Message Shown In The CENTERSTACK Infotainment Display

  1. H1 PERFORM A NETWORK TEST

    • Ignition ON.
    • Using a diagnostic scan tool, perform a network test.

    Do all modules pass the network test? 

    Yes  GO to  H2
    No  REFER to: Communications Network .

  2. H2 CHECK THE PAM (PARKING ASSIST CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the PAM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to the PAM DTC chart .
    No  GO to  H3

  3. H3 CHECK THE PSCM (POWER STEERING CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the PSCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Power Steering . REFER to: Power Steering .
    No  GO to  H4

  4. H4 CHECK THE SCCM (STEERING COLUMN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the SCCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Steering Wheel and Column Electrical Components .
    No  GO to  H5

  5. H5 CHECK THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the ABS module self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Anti-Lock Brake System (ABS) and Stability Control .
    No  GO to  H6

  6. H6 CHECK THE PCM (POWERTRAIN CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the PCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  Refer to the appropriate article for the procedure.
    No  GO to  H7

  7. H7 CHECK THE RCM (RESTRAINTS CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the RCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Airbag Supplemental Restraint System (SRS) .
    No  GO to  H8

  8. H8 CHECK THE TRM (TRAILER MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the TRM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Trailer Lamps .
    No  GO to  H9

  9. H9 CHECK THE FCIM (FRONT CONTROLS INTERFACE MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the FCIM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  Refer to the appropriate article for the procedure.
    No  GO to  H10

  10. H10 CHECK THE GWM (GATEWAY MODULE A) CONTINUOUS MEMORY DIAGNOSTIC TROUBLE CODES (CMDTCS)

    • Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Communications Network .
    No  GO to  H11

  11. H11 CHECK THE BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the BCM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  REFER to: Body Control Module (BCM) .
    No  GO to  H12

  12. H12 CHECK THE APIM (SYNC MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)

    • Using a diagnostic scan tool, perform the APIM self-test.

    Are any Diagnostic Trouble Codes (DTCs) present? 

    Yes  Vehicles With: Touchscreen Display REFER to: Information and Entertainment System . Vehicles With: Sony Audio System REFER to: Information and Entertainment System .
    No  GO to  H13

  13. H13 CHECK FOR CORRECT BCM (BODY CONTROL MODULE) OPERATION

    • Ignition OFF.
    • Disconnect and inspect all BCM connectors and related in-line connectors.
    • Repair:
      • corrosion (install new connector or terminals - clean module pins)
      • damaged or bent pins - install new terminals/pins
      • pushed-out pins - install new pins as necessary
    • Reconnect the BCM connectors and related in-line connectors. Make sure they seat and latch correctly.
    • Operate the system and determine if the concern is still present.

    Is the concern still present? 

    Yes  CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If a TSB exists for this concern, DISCONTINUE this test and FOLLOW the TSB instructions. If no Technical Service Bulletins (TSBs) address this concern, Refer to BCM Hardware Testing .
    No  The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. ADDRESS the root cause of any connector or pin issues.
scientia non olet · About LEMON Manuals