Passive Key And Immobilizer System Message Center Displays
The IPC provides passive key and immobilizer system message center displays to indicate the following:
- A steering lock fault exists
- Accessory power is active
- Key is in the backup slot
- Key is in the luggage compartment
- Key is left in the vehicle
- No key is detected
- Press the brake to start the vehicle
The IPC uses multiple messages received from the RFA module and the BCM over the Medium Speed Controller Area Network (MS-CAN) to display the passive key and immobilizer system messages.
The required network messages are:
- RKE key in trunk
- Passive key warning
- Steering column failure
- Key warning indication data
- Press brake to start message request
- Door status