Pinpoint Test U : The Mil (Malfunction Indicator Lamp) Is Never Or Always On: Notes
Normal Operation and Fault Conditions
See MIL. REFER to: Instrument Panel Cluster (IPC) - System Operation and Component Description
If the engine MIL request message is missing or invalid for less than 5 seconds, the IPC defaults the MIL to its last state (on or off) based upon the last known good message received.
If the engine MIL request message is missing for 5 seconds or longer, the BCM and the IPC set DTC U0100:00. If the engine MIL request message is missing, the IPC defaults the MIL on.
Possible Sources
- PCM concern
- IPC