Pinpoint Test H : U3006:16: Notes
Normal Operation and Fault Conditions
On van models (without RJB), the IPMB receives voltage through BJB fuse 30 (5A). On wagon models (with RJB), the IPMB receives voltage through the RJB fuse 29 (5A).
Refer to PARKING AID SYSTEM for schematic and connector information.
DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U3006:16 | Control Module Input Power "A": Circuit Voltage Below Threshold | Sets in continuous memory and on demand when the IPMB detects supply voltage below 8 volts. |
Possible Sources
- Wiring, terminals or connectors
- Battery concern
- Charging system concern
- IPMB