Pinpoint Test Ar : The Steering Mode RTT (RECONFIGURABLE Telltale) RTT (RECONFIGURABLE Telltale) Is Never On
- AR1 CHECK THE MESSAGE CENTER OPERATION
- Ignition ON.
- Close all doors, the hood and luggage compartment lid.
- Clear all message center warnings by pressing the OK button for each warning present.
- Monitor the door ajar RTT.
- Open the driver door.
- Clear the message center popup warning.
- Monitor the door ajar RTT.
Is the door ajar RTT off with the door closed, and on with the door open?
Yes GO to AR2 No INSTALL a new IPC. REFER to: Instrument Panel Cluster (IPC) . - AR2 VERIFY THE STEERING MODE SYSTEM OPERATES CORRECTLY
- Verify the steering effort changes modes.
NOTE: Refer to the Owner's Literature for additional information on selecting the different steering modes.Does the steering effort change when selecting different modes?
Yes GO to AR3 No DIAGNOSE the EPAS steering effort mode selection. REFER to: POWER STEERING . - AR3 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
- Using a diagnostic scan tool, perform the IPC self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes REFER to DTC Chart: IPC . No GO to AR4 - AR4 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes REFER to: MODULE COMMUNICATIONS NETWORK . No DIAGNOSE the EPAS. REFER to: POWER STEERING .