Network Message Chart

Module Network Input Messages - IPC

Broadcast Message	Originating Module	Message Purpose
Adaptive cruise control stop mode	Cruise Control Module (C-CM)	Input used to control the adaptive cruise control warning chime.
Adaptive cruise control warning request	Cruise Control Module (C-CM)	Input used to control the adaptive cruise control warning chime.
Cruise control status	PCM	Input used to control the adaptive cruise control warning chime.
Cross traffic alert left status	SODL and SODR	Input used to control the Blind Spot Information System (BLIS)/Cross Traffic Alert (CTA) chime.
Cross traffic alert left status	SODL and SODR	Input used to control the Blind Spot Information System (BLIS)/Cross Traffic Alert (CTA) chime.
Door ajar status	BCM	Input used to control the electric vehicle engine off chime.
Driver door ajar status	BCM	Input used for the ignition-engine on chime.
Driver safety belt buckle status	RCM	Input used to control the Belt-Minder® chime.
Forward collision chime request	Cruise Control Module (C-CM)	Input used for the confirmation chime portion of the forward collision warning chime.
Forward collision warning message request	Cruise Control Module (C-CM)	Input used for the forward collision warning chime.
Front passenger detect status	RCM	Input used to control the Belt-Minder® chime.
Gear lever position	PCM	Input used to control the electric vehicle engine off chime and the Belt-Minder® chime.
Headlamp switch status	BCM	Input used to control the headlamps on warning chime
Key-in-ignition status	BCM	Input used to control the key-in-ignition chime status.
Memory feedback request	DSM	Input used to control the memory feedback chime status.
Parking aid chime request	Parking Aid Module (PAM)	Input used to control the parking aid chime status.
Parking brake chime request	ABS module	Input used to control the electric parking brake chime status.
Passenger safety belt buckle status	RCM	Input used to control the Belt-Minder® chime.
Perimeter alarm chime request	BCM	Input used to control the perimeter alarm chime status.
Power pack status	PCM	Input used for the ignition-engine on chime.
Side obstacle sensor status-left	SODL and SODR	Input used to control the Blind Spot Information System (BLIS)/Cross Traffic Alert (CTA) chime.
Side obstacle sensor status-right	SODL and SODR	Input used to control the Blind Spot Information System (BLIS)/Cross Traffic Alert (CTA) chime.
Stability-traction control chime request	ABS module	Input used for the service AdvanceTrac® chime.
Transmission gear display actual	PCM	Input used for the ignition-engine on chime.
Turn signal status	SCCM	Input used for the turn signal left on chime.
Vehicle speed	PCM	Input used to control the Belt-Minder® chime.

Module Network Input Messages - ACM and DSP

Broadcast Message	Originating Module	Message Purpose
Belt-Minder® audio mute	IPC	Input from the IPC used to control the Belt-Minder® audio chime output.
Chime source	IPC	Input used to configure the chime source (IPC or the audio system).
Cross Traffic Alert (CTA) request	IPC	Input from the IPC used to control the Cross Traffic Alert (CTA) audio chime output.
IPC chime request	IPC	Input from the IPC used to control the audio chime output.
Power up chime modules	IPC	Input used to initiate the audio system as the chime source.